Door Open Alarm; High Temperature Alarm; First Use; Cleaning The Interior - IKEA ISANDE AA-2242231-1 Bedienungsanleitung

ENGLISH
2. Press 4 OK button to confirm.
The Fan-cooling indicator is shown.
To switch off this function repeat the
procedure until the Fan-cooling indicator
disappears.
If the function is activated
automatically the Fan-cooling
indicator is not shown (refer to
"Daily use").
The activation of the Fan-cooling
Function increase the energy
consumption.
The fan stops when the door is open and
restarts immediately after the door closing.

High temperature alarm

When there is a temperature increase in the
freezer compartment (for example due to an
earlier power failure), the alarm and freezer
temperature indicators flash and the sound
is on.
To deactivate the alarm:
1. Press any button.
The sound switches off.

First use

Cleaning the interior

Before using the appliance for the first time,
the interior and all internal accessories
should be washed with lukewarm water and
some neutral soap to remove the typical
smell of a brand-new product, then dried
thoroughly.
Caution! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will
damage the finish.
2. The freezer temperature indicator shows
the highest temperature reached for a
few seconds, then the display shows the
set temperature again.
The alarm indicator continues to
flash until the normal conditions
are restored.
If you do not press any button,
the sound switches off
automatically after around one
hour to avoid disturbing.

Door open alarm

If the fridge door is left open for
approximately 5 minutes, the sound is on
and alarm indicator flashes.
The alarm stops after closing the door.
During the alarm, the sound can be muted
by pressing any button.
If you do not press any button,
the sound switches off
automatically after around one
hour to avoid disturbing.
Caution! The accessories and
parts of the appliance are not
suitable for washing in a
dishwasher.
16