Inserting And Pulling Out The Re- Chargeable Battery (02); Fitting Attachments; High-Pressure Cleaning Lance (03); Multi-Spray Nozzle (04) - AL-KO EASY FLEX Betriebsanleitung

GB
4.2 Inserting and pulling out the
rechargeable battery (02)
IMPORTANT! Danger of damage to the re-
chargeable battery. If the rechargeable battery
is left in the appliance after use, it may damage
the rechargeable battery.
■
Immediately after use, pull the rechargeable
battery out of the appliance and store in a
frost-protected area.
■
Only insert the rechargeable battery in the
appliance immediately before starting work.
Inserting the rechargeable battery
1. Push the rechargeable battery (02/1) into the
battery slot until it engages (02/a).
Pull out the rechargeable battery
1. Press and hold the release button (02/2) on
the rechargeable battery (02/b).
2. Pull out (02/c) the rechargeable battery
(02/1).
4.3

Fitting attachments

WARNING! Danger if assembly is not
carried out completely! Operation of an incom-
pletely assembled appliance can result in serious
injury.
■
Operate the device only when it is fully as-
sembled!
■
Insert the rechargeable battery into the appli-
ance only when it has been fully assembled!
■
Check that the attachments have been fitted
correctly before switching on.
4.3.1

High-pressure cleaning lance (03)

1. Align the lug of high-pressure cleaning lance
(03/1) with the opening of high-pressure noz-
zle (03/2).
2. Insert (03/a) high-pressure cleaning lance
(03/1) into high-pressure nozzle (03/2).
3. Twist (03/b) high-pressure cleaning lance
(03/1) until it engages.
4.3.2

Multi-spray nozzle (04)

1. Pull back (04/a) and hold the quick-coupler
on high-pressure cleaning lance (04/1).
2. Insert (04/b) multi-spray nozzle (04/2) into
high-pressure cleaning lance (04/1).
3. Release quick-coupler (04/1).
24
4.3.3

Hose adapter (08)

Fitting the hose adapter
1. Screw on (08/b) hose adapter (08/1) using a
wrench.
Removing the hose adapter
1. Unscrew (08/a) hose adapter (08/1) using a
wrench.
4.3.4

Hose (05)

1. If hose adapter (05/2) is not fitted see chapter
4.3.3 "Hose adapter (08)", page 24.
2. Pull back (05/a) and hold the quick-coupler
on hose (05/1).
3. Push (05/b) hose (05/1) onto hose adapter
(05/2).
4. Release quick-coupler (05/1).
4.3.5

Detergent bottle (06)

The detergent bottle supplies soapy water for re-
moving stubborn dirt.
1. Fill the detergent bottle with a cleaning agent
that is not harmful to water.
2. Push (06/a) detergent bottle (06/1) into high-
pressure nozzle (06/2).
3. Turn (06/b) detergent bottle (06/1) through
90° to fix it in place.
4.3.6

Bottle adapter (07-09)

WARNING! Danger of injuries and appli-
ance damage. If the appliance is lying down, liq-
uid can escape through the ventilation openings
of the accessories when the bottle is attached.
■
Remove the rechargeable battery before ly-
ing it down on a flat surface.
IMPORTANT! Danger of damage to the appli-
ance. The appliance can be damaged if it is con-
nected to a water supply with dirty, rusty, muddy
or corrosive water. This includes plant fertilisers,
plant protection products and cleaning agents.
■
Clean the appliance with clean water to pro-
long its service life.
NOTE The attachment is not compatible
with all soda and water bottles.
1. Fill the bottle.
2. Screw (07/a) bottle adapter (07/1) onto the
filled bottle (07/2).
3. Unscrew (08/a) hose adapter (08/1) using a
wrench.
Assembly and starting operation
PW 2040