Start-Up And Initial Ip Camera Configuration; Description Of Connectors And Control Tools - Novus NVIP-8VE-6502M/F Benutzerhandbuch

NVIP-8VE-6502M/F - User's manual (short form) ver 1.0

START-UP AND INITIAL IP CAMERA CONFIGURATION

2. START-UP AND INITIAL IP CAMERA CONFIGURATION
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.

2.1 Description of connectors and control tools

4
1. 100 Mb/s Ethernet port (PoE RJ-45 connector)
2. Audio input (Jack 3.5 mm)
3. Power supply 12VDC
4. Counter screw
5. Base of camera
6. MicroSD card slot
7. Reset button
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
5
8
1
2
3
6
7