Factory Settings Restoring; Software Factory Settings Restoring Via Web Browser; Software Factory Settings Restoring Via Nms Iptool - Novus NVIP-8VE-6502M/F Benutzerhandbuch

NVIP-8VE-6502M/F - User's manual (short form) ver 1.0

FACTORY SETTINGS RESTORING

6. FACTORY SETTINGS RESTORING
Restoring factory settings of the IP camera restores all default settings. This process takes about two
minutes. NOVUS NVIP-8VE-6502M/F cameras allow to restore defaults via:
•
software (via web browser )
•
software (via NMS IPTool)
•
hardware (using reset button (RST))

6.1. Software factory settings restoring via web browser

Restoring factory settings via web browser allows you to optionally keep some settings, such as
network settings. To restore default settings go to: "Maintenance -> Backup and Restore" tab.

6.2. Software factory settings restoring via NMS IPTool

NMS IPTool (version 1.23.4 or later) allows to restore factory settings. To restore settings find camera
via NMS IPTool, click right mouse button and choose " Restore default configuration". In 30 seconds it
is required to turn the camera power off and on.
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
18