Connection Diagram - Pioneer gm d510m Bedienungsanleitung

Connection Diagram

Grommet
RCA input jack
Speaker terminal
See the "Connecting the Speaker
wires" section for speaker connec-
tion instructions.
Ground wire (black) [RD-223] (sold separately)
Connect to metal body or chassis.
Fuse (30 A)
Special red battery wire [RD-223] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Fuse (30 A)
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote control
terminal of the car stereo (SYSTEM REMOTE CONTROL). The
female terminal can be connected to the auto-antenna relay control
terminal. If the car stereo does not have a system remote control ter-
minal, connect the male terminal to the power terminal through the
ignition switch.
Connecting wires with RCA
pin plugs (sold separately).
Fuse (25 A) × 2
Car stereo with
RCA output jacks
External Output
(Subwoofer output)
6