D) Connection To A Pc - VOLTCRAFT BS-600SD Bedienungsanleitung

Video
• Press the MENU button to select the menu.
• Select the menu point "DVR" with the ↓ or ↑ buttons and press it to activate the release
button . The video camera symbol appears on the top left of the monitor.
• Now press the release button to record a video.
• Press the release button again to end the video recording.
Playback
• Press the MENU button to select the menu.
• Select the menu point "Playback" with the ↓ or ↑ buttons and press it to activate the release
button.
• The photo/video last taken is displayed on the monitor.
• Select the desired photo/video with the ↓ or ↑ button.
The video playback is automatically started. Press the trigger button during the playback if
you want to interrupt the video. Press the trigger button again to keep the video running.

d) Connection to a PC

• Open the cover on the right next to the monitor.
• Connect the mini USB plug to the appropriate socket and connect the USB A plug to a free
USB interface of your computer.
• The endoscope is now used as a card reading device. This enables you to read stored data
from the micro SD card on the PC.
• First disconnect the connection via the operating system before unplugging the USB cable.
The LED battery lights up orange and the battery of the monitor is charged when
connecting the monitor to a PC with the USB cable.
It is possible to connect the monitor to a PC if the monitor is separated from the
endoscope.
Do not connect the endoscope basic unit to a PC if you have removed the monitor
from the endoscope.
29