Picture Control; Changing The Picture Settings; Advanced Settings - Samsung PS50B679 Benutzerhandbuch

Picture Control

Changing the Picture Settings

Mode
❑
You can select the type of picture which best corresponds to your viewing requirements.
„
Dynamic / Standard / Eco / Movie
T
Press the TOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools → Picture Mode.
❑ Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
• : Adjusts the pixel brightness.
Cell Light
• : Adjusts the contrast level.
Contrast
• : Adjusts the brightness level.
Brightness
• : Adjusts the sharpness.
Sharpness
• : Adjusts the colour saturation of the picture using the bar on the screen.
Colour
• : Adjusts the colour tint of the picture.
Tint (G/R)
When you make changes to
N
accordingly.
N
The adjusted values are saved for each picture mode.
TV, Ext., AV modes of the PAL system, you cannot use the Tint Function.
N
In Analogue
PC mode, you can only make changes to Cell Light, Contrast and Brightness.
N
In
N
Each adjusted setting will be stored separately according to its input mode.
The energy consumed during use can be signiicantly reduced if the level of brightness of the picture is reduced, and then this
N
will reduce the overall running cost.
❑

Advanced Settings

You can adjust the advanced settings for your screen including the colour and contrast.
N
Advanced Settings
PC mode, you can only make changes to Dynamic Contrast, Gamma and
N
In
White Balance from among the Advanced Settings items.
„
Black Tone →
Off / Dark / Darker / Darkest
You can enhance the picture depth by adjusting the black colour density.
„
Dynamic Contrast →
You can adjust the screen contrast so that the optimal contrast is provided.
„
Gamma
You can adjust the primary colour (Red, Green, Blue) Intensity.
„
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
• : Automatically sets the colour range depending on the input video source.
Auto
• : Sets the colour range wider than the that of the input video source.
Native
• : Adjusts the colour range to suit your preference.
Custom
N
Customizing the Colour Space
- Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
- Colour → Red / Green / Blue / Yellow / Cyan / Magenta
- Red / Green / Blue: You can adjust the RGB values for the selected colour.
- Reset: Resets the colour space to the default values.
Cell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
is available in Standard or Movie mode.
Off / Low / Medium / High
English - 18
Mode : Standard ►
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Auto Adjustment
Auto Adjustment
Screen
►
Advanced Settings
Picture Options
Picture Reset
Continued...