❑
Manual Store
Scans for a channel manually and stores it in the TV's memory.
Digital Channel
(Digital)
N
Digital Channel is only available in DTV mode.
•
: Set the Channel number using the ▲, ▼ or number (0~9) buttons.
Channel
•
: Set the frequency using the number (0~9) buttons.
Frequency
•
: Set the bandwidth using the ▲ or ▼ buttons.
Bandwidth
When it has inished, channels are updated in the channel list.
N
Analogue Channel
Manual store for analogue channel.
•
(Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
Programme
buttons.
•
Colour System → Auto / PAL / SECAM / NTSC 4.43
•
→ BG / DK / I / L : Sets the sound system value using the ▲ or ▼ button.
Sound System
•
(When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
Channel
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
N
If there is abnormal sound or no sound, reselect the sound standard required.
•
(When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
Search
frequency range until the irst channel or the channel that you selected is received on the screen.
•
(When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Store
N
Channel mode
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Satellite
•
: Selects the satellite using the up/down buttons.
Satellite
•
: Selects the transponder using the up/down buttons.
Index
•
: Selects either free or all channels to store.
Scan Mode
•
: Sets the frequency using the numeric buttons.
Frequency
•
: Sets the symbol rate using the numeric or up/down buttons.
Symbol Rate
•
: Sets the Polarity using the up/down buttons.
Polarity
•
: Enable/Disable network search using the up/down buttons.
Network Search
•
: Display the current status of broadcasting signal.
Signal Quality
N
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
❑
Cable Search Option
You can set additional search options such as frequency and symbol rate for cable network searching. (Depending on the each
country)
•
: Displays the frequency start values.
Freq.Start
•
: Displays the frequency stop values.
Freq.Stop
•
: Displays available modulation values.
Modulation
•
: Displays available symbol rates.
Symbol Rate
N
If the
Freq.Start value is bigger than Freq.Stop value, the warning message is displayed.
: Sets the colour system value using the ▲ or ▼ button.
English - 13
Continued...