Devolo Mesh WiFi 2 Handbuch Seite 99

The devolo Mesh WiFi 2 offers two different vari-
ants for transmitting these encryption keys:
WPS using WPS pushbutton
1
Start the encryption
devolo Mesh WiFi 2
a
By pressing the Wi-Fi button on the front
side of the device or
a
By pressing the corresponding Start button
on the user interface under Wi-Fi
Pushbutton.
2
Then either press the WPS key of the Wi-Fi
device you are adding or enable the WPS
mechanism in the Wi-Fi settings of the Wi-Fi
device. Now the devices exchange their encryp-
tion keys and establish a secure Wi-Fi connec-
WPS via PIN
To interconnect Wi-Fi devices in your wireless net-
work securely using a PIN variant, go to the web in-
terface and, under Wi-Fi
the WPS PIN generated by your Android smart-
phone or tablet and start the encryption process by
pressing the corresponding Start button.
Use of the WPS method implies the use of the
WPA/WPA2
encryption standard.
When the WPS function is enabled, the WPA3
process on the
encryption standard is not available for techni-
cal reasons.

WPS
Therefore take note of the following automatic
settings:
b
Network configuration 43
tion. The Wi-Fi LED on the front panel indicates
the synchronisation process by flashing.

WPS
or WPA2
For more information of the encryption
standards, refer to Chapter 4.4.2 Wi-Fi
networks

If under Wi-Fi Wi-Fi networks, the No
encryption option is selected in advance,
WPA2 is set automatically. The newly genera-

WPS PIN, enter
or WPA3/WPA2
devolo Mesh WiFi 2