Devolo Mesh WiFi 2 Handbuch Seite 101

b
Using the web interface, in the PLC menu; as
described below:
Pairing – Using on-screen button
1
Click Start pairing to start the pairing opera-
tion. This may take some time.
2
As soon as the new devolo Mesh adapter is
integrated into your existing network, it
appears in a list of available and established
connections.
Pairing – Using custom password
You can also assign your network a custom PLC
password you pick yourself. Enter this password for
each devolo Mesh adapter in the Network
password field and confirm your settings by
clicking the Disk icon.
Note that the custom password is not assigned
to the whole PLC network automatically. In-
stead, you must assign it separately to each of
your devolo Mesh adapters.
Unpairing – Removing an adapter from a net-
work
1
To remove a devolo Mesh adapter from your
devolo Mesh network, click Leave Powerline
network.
Network configuration 45
2
Wait until the LED flashes red and then dis-
connect the devolo Mesh adapter from the
mains supply.
Compatibility mode
Using as VDSL connection may negatively impact
the performance of the bandwidth connection.
Select from among the following settings in order
to mitigate any potential negative effects.
Operating mode:
b
MIMO
b
SISO
Signal transmission profiles:
b
Full power
b
VDSL 17a (default)
b
VDSL 35b
Get in touch with your internet provider to
find out which signal transmission profile is
the best option for your internet connection.
The MIMO operating mode and the VDSL 17a si-
gnal transmission profile are configured by default.
devolo Mesh WiFi 2