Operation - WOLFF 72916 Originalbetriebsanleitung

EN
Translation of the original operating
instructions
WOLFF Pre-Separator 30 l
Powerful pre-separator that fi lters out large
amounts of coarse dirt and fi ne dust before
vacuuming.
Features:
► Constant suction power
► Protection of the vacuum cleaner and fi lter
► Particle separation rate up to 99%
► Easy to empty using standard rubbish bags
Technische Daten
Weight ...................................................................... 8,9 kg
Dimensions ........................................................... Ø 40x90
Hose length ................................................................1,2 m
Filling Quantity .............................................................. 30 l
Minimum volume fl ow .............................140 m³/h (Starvac)
Maximum volume fl ow...............................570 m³/h (T-Rex)
Maximum negative pressure.................................... 25 kPa
Connection cross-sections connecting hos .........................
.........................................................d = 50 mm, D = 59 mm
Connection cross-sections cyclone:.....................................
.....................................d = 44 mm, D = 48 - 54 mm conical
Instructions for use:
► Completely assembled cyclone
► Dirt container
► Hose 1.2 m, #73102
► Adapter set for Ronda vacuum cleaner #82069
Instructions for use:
The pre-separator is assembled between the
vacuum cleaner and machine.
It can be used wood fl ooring and monodisc grinding
machines, saws, hand-held sanding machines and
many other electrical devices and can also be used
for vacuuming surfaces with a fl oor nozzle.
4
Hose to the vacuum
cleaner #73102
(included )
#72916
A
Make sure that the hose between the
machine and the cyclone is always
free and open.
A clogged hose can lead to extreme underpressure
in the dirt container and destroy it.

Operation:

► Insert the rubbish bag in the pail.
► Close the pail with the clamping ring.
► Connect the outlet of the pre-separator with the
vacuum cleaner.
► Connect the suction hose of the machine to the
inlet on the side of the pre-separator and fasten
it to the strain relief
► After the work is complete, empty the dirt container.
WOLFF recommends the industrial vacuum:
Starvac Vacuclean / Compactclean or Dust
Hose to the
Machine not
(included)
Strain relief