AVIRE Memcom+ Einbauanleitung Seite 5

Quick Start Guide
Language Selection
The first time the Memcom unit is
+
powered up, it will automatically
load the language selection. Using
the up and down arrows scroll to the
required language and press #.
Once you have selected the correct
language the Memcom will load the
+
Quick Start menu, which is mapped
out to the right.
Menu Controls
Scroll up
Scroll Down
#
Forward / Accept
*
Back / Cancel
S imply follow the quick start guide
on this page to set up the essential
programming of the unit.
If you require details of the full menu
structure available then please refer
to pages 7-14 of this guide.
Avire Hub
The Avire Hub is our cloud platform
for monitoring Avire emergency
communication systems. Users
can set up and maintain their
own database of lift emergency
telephones and the Avire Hub will
receive emergency and test calls. The
Avire Hub can also remotely program
the telephone units, saving time and
money and reducing the number of
site visits required.
Please contact your local sales office
for access to the Avire Hub.
www.avire-global.com
Quick Start Menu Process Guide
Step 1 Accessories
Step 2 Alarm No 1
Step 3 Tech. No
Step 4 Background No.
Step 5 Volume
Step 6 Location
Step 7 ID Code
Step 8 Network ID
Note: The quickstart menu also contains Step 9: Time and Step 10: Date
but these can be ignored if using the Memco protocol for background calls
(Memco protocol auto-syncs date and time with call centre).
You have now finished the essential programming, If
you are in an option, press * to return to the Quick Start
Menu. Then, to exit programming mode Press * and
select the action required upon exiting from this list.
+ Select the accessories you have attached to
the unit by pressing # to select / deselect
each option
+ Using the keypad, enter the first alarm
telephone number.
+ Select the protocol required from the list
which includes Guided, Unguided, Memco,
P100 and Contact ID.
+ Using the keypad, enter the telephone
number of the software system for Technical
calls.
+ Set to 03308088484 & P100 for Avire Hub. If
using Memcom with DCP, set parameter P035
to 03308088484 to enable Background calls
over data.
+ Select the protocol required from the list.
+ The unit will ask if you want to use the same
number for background calls, press # to
accept and * to reject.
+ If you have accepted to copy the telephone
number from the Tech No, you can skip this
option.
+ Set to 03308088484 & P100 for Avire Hub. If
using Memcom with DCP, set parameter P035
to 03308088484 to enable Background calls
over data.
+ If not, enter the telephone number required
+
Select the protocol required from the list
+ If you require a volume different to the
default volume, press the up and down
arrows until the desired volume is reached
+ Press # to confirm
+ To record a Location Message, press 2 to
start recording
+ Press # to end the recording
+ Press 1 to play the message back
+ Only required when using Memco, P100 or
ContactID protocols. Default setting matches
the ID code printed on the unit label - should
only be changed if required to match an
older unit being replaced, or if a company-
specific numbering scheme is used.
+ If you are attaching more than the one
Memcom unit to a single telephone line, you
need to assign each unit a network ID
+ The first unit would have an ID code of 1, the
second unit 2, the third unit 3 and so on.
5 5