AVIRE Memcom+ Einbauanleitung Seite 12

Full Programming Options
Time / Date >
Time
Date
Advanced >
Passcode
Network ID
Next EN81 call
PBX Frequency
Language
Pri.rly.mode
Pri.rly.o/ride >
GMT offset
DTMF RX
Menu Sections
Time / Date
The time and date can be set by entering the correct values and
confirmed by pressing #
Advanced Settings
Passcode
Enter the passcode required to enter standard programming mode
when EN81-28 mode is active. (up to 6-digits). This will also become
the passcode required to access the old menu structure. However,
from the idle screen you will have to press * PASSCODE #
>
Network ID
>
Set an extension number 1-8 where units share a phone line. All unit
IDs on a system need to be unique.
Next EN81 call
Details the next scheduled Background call for the unit.
PBX Frequency (Default 320)
Sets disconnect tone frequency (40-2000Hz in 40Hz steps), if
connected to a PBX which does not use standard tones.
Note: 640 is another commonly used PBX frequency.
Language
Set the language required by entering the following:
English
German
French
Italian.
Spanish
Note: Other languages may also be listed here.
ü
û
û
û
û
12 12