What To Do In The Event Of An Alarm - FireAngel CO-9X-10-EU Benutzerhandbuch

Test the sounder, battery and circuitry by pressing and releasing the
Test/ button to confirm that the alarm is operating properly . The alarm
should sound as soon as the Test button is pressed, and the Alarm LED
will illuminate red indicating that the sounder is working and the battery is
providing power to the unit . This test should be performed on a weekly basis .

WHAT TO DO IN THE EVENT OF AN ALARM

WARNING: A loud alarm is a warning that potentially lethal levels of
carbon monoxide are present . Never ignore this alarm, further exposure
can be fatal . Immediately check residents for symptoms of carbon monoxide
poisoning, and contact the proper authorities to resolve all CO problems .
NEVER IGNORE ANY ALARM .
Please carefully review this guide to ensure that you know what actions to
take in the event of an alarm .
What to do during an alarm:
• Keep calm and open the doors and windows to ventilate the property .
• Stop using all fuel-burning appliances and ensure, if possible, that they
are turned off .
• Evacuate the property leaving the doors and windows open .
• Ring your gas or other fuel supplier on their emergency number; keep the
number in a prominent place .
• Do not re-enter the property until the alarm has stopped . When exposed
to fresh air it can take up to 10 minutes for the sensor to clear and the
alarm to stop depending on the level of carbon monoxide detected .
18