Maintenance / Alarm Test - FireAngel CO-9X-10-EU Benutzerhandbuch

MAINTENANCE / ALARM TEST

Your alarm will alert you to potentially hazardous CO concentrations in your
home when maintained properly . To keep your alarm in proper working
order, and to ensure that the sensor will last for the lifetime of the product, it
is recommended that you keep it free of dust by gently vacuuming the case
with a soft brush attachment every 3 months .
To prevent the possibility of contaminating the sensor in your alarm and thus
affecting its reliability:
• Never use cleaning solutions on your alarm . Simply wipe with a slightly
damp cloth .
• Do not paint the alarm .
• Do not spray aerosols on or near the alarm .
• Do not use any solvent based products near the alarm .
• If installing in a caravan or boat there maybe other substances present,
that may not normally be found in the home, that could affect the
reliability of the CO alarm . Avoid using the following in close proximity to
the alarm; oils, cleaning fluids, polishes, paints and greases .
• Do not attempt to repair your CO alarm . Do not remove any screws or
open the main casing of your alarm . Any attempt to do so may cause
malfunction and will invalidate the warranty .
17