Use; As A Record Player - Audacity K-2217 Gebrauchsanleitung

Meter toolbar
h "Output level meter"
The signal level during playback is shown here.
I
"Input level meter"
The signal level during recording is shown here.
Mixer toolbar
J "Output volume"
The playback volume can be set here.
K "Input volume"
The volume of the recording can be set here.
L Project area
The track is displayed as an audio track here during and after recording.
M Status bar
If you move the mouse pointer over a tool in the programme window,
its name and function will appear on the status bar.

Use

❐ Risk of injury! The pickup needle is pointy. Do not touch the needle.
❐ The pickup needle is very sensitive. For this reason, do not touch the needle to prevent
damaging it and consequently the record.
❐ The rubber mat serves to protect the record being spun. For this reason, do not use the
device without the rubber mat to prevent damage to the record and the device.

As a record player

1. Place the device on a dry, level and solid surface.
2. Take the pickup arm out of the bracket and place it on the rest. Fold the bracket in.
3. Connect the USB plug of the enclosed USB cable to your computer's USB port when your
computer is on and connect the mini-USB plug to the device's USB port.
4. Place a record on the turntable.
5. Take the pickup arm off of the rest and remove the cover from the pickup.
6. Now place the needle in the desired position on the record. The turntable will automati-
cally begin to turn as soon as the pickup arm is lifted off the rest.
7. To stop, lift the pickup arm off of the record and place it back on the rest. The turntable
will stop as soon as you place the pickup arm on the rest.
8. After use, disconnect the USB cable from the device and your computer, lift up the bracket
and insert the pickup arm. Then slide the cover back onto the pickup.
04860_DE-GB-FR-NL_V0.indb 20
Downloaded from www.Manualslib.com
ATTEnTIon!
Using RCA jacks, you can connect external speakers to the device if necessary.
manuals search engine
20
06.01.12 13:41