Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Once you activate this function on the washing machine, it will remain enabled apart from certain conditions
and allow you to control your washing mahine remotely via bluetooth.
In certain cases, it deactivates itself for safety reasons:
•
When your washing machine undergoes a power interruption.
•
When programme knob is turned and a different programme selected or appliance is turned off.
4.3.15.4 Troubleshooting
Do the following if you have a problem with controlling or connection. Observe whether the problem persists or
not after the action you have performed. Do the following if the problem is not resolved.
•
Check whether your smart device is connected to the relevant home network.
•
Restart the product application.
•
Turn bluetooth off and then on via user control panel.
•
If the connection cannot be established with the above processes, repeat the initial set-up settings on the
washing machine.
If the problem persists, consult an Authorised Service Agent.
4.3.15.5 Drum Illumination
Drum illumination lamp of your machine will light up during programme selection. The lamp will go off 10
minutes after the programme starts. If no programme is started or no key is pressed within 10 minutes during
programme selection process, the drum illumination lamp will go off.
Drum illumination lamp of your machine will light up after the programme is completed. It will go off when
you press the On/Off button. The drum illumination lamp will go off if you do not press any button within 10
minutes after the programme has ended.
28 / EN
Washing Machine / User's Manual
Werbung
Inhaltsverzeichnis
