Opening The Loading Door In Case Of Power Failure; Changing The Selections After Programme Has Started - Beko WTE10736XBMN1 Bedienungsanleitung

Opening the loading door in case of power failure:

C
In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the
loading door.
A
WARNING:
may be hot and could cause scalding.

4.3.12 Changing the selections after programme has started

Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.
24 / EN
Before opening the loading door, make sure that there is no water in the machine to avoid flooding. Water
•
Turn off and unplug the appliance.
•
Open the pump filter lid.
•
Remove the loading door emergency handle behind the filter cover with
a tool.
•
Open the loading door by pulling the loading door emergency handle
downwards.
•
Try to pull the handle downwards again if the loading door is not opened.
•
Bring the loading door emergency handle to its original position after
opening the loading door.
:
Washing Machine / User's Manual