Heatscope SmartBox Original Montage- Und Gebrauchsanleitung Seite 45

Upper LED Lower LED
off off
off on
on off
on on
If no button is pressed for more than 1 minute in the setup mode, the setup will be closed without any
changes.
The setup mode can be reached only after connecting the HEATSCOPE
supply! After switching on the heater via remote, the setup mode is only reachable after disconnecting
the unit from the main power supply.
CoNTRoL VIA INFRARED REMoTE
SMARTBOX
The remote control via infrared will only work if the
ensure an unobstructed view between the two devices. If necessary please change your position to make
sure, you can control the heater via remote.
Auto-oFF feature
deactivated
4 hours
6 hours
8 hours
SMARTBOX is not covered by the heater; you have to
A M B I E N T H E A T I N G S O L U T I O N S
®
and the SMARTBOX with a power
EN
45