Heatscope SmartBox Original Montage- Und Gebrauchsanleitung Seite 35

A M B I E N T H E A T I N G S O L U T I O N S
oPERATIoN, INSTALLATIoN INSTRUCTIoNS AND MIN. DISTANCES
®
HEATSCOPE features two omnipolar „ON/OFF" switches.
To make sure that you can control the heater via the , both switches must be in the
SMARTBOX
ON position.
The unit must be connected to a residual current circuit breaker!
All cables must be positioned so that they cannot come into contact with the surface of the radiant
heater at any time.
EN
35