Performing A Full Scan - TechniSat DIGITRADIO 52 CD Bedienungsanleitung

7.2.1

Performing a full scan

The automatic scan Full scan scans all DAB+ Band III stations and thereby finds
all stations being broadcast within the reception range.
After the scan is complete, the first station is played back in alphanumeric order.
> In order to perform a complete scan, open the menu by keeping the SELECT/
MENU button depressed and use the < or > buttons to select the menu item
[Complete Scan]. Then press the SELECT/MENU button briefly.
> [Scanning...] appears on the display.
During the scan the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 5.3.2).
108