Comelit UT9270 Programmieranleitung Seite 16

SCREENSAVER
This section can be used to enable viewing of the default screensaver, or to load a custom one
SETTINGS
• Enable screensaver: this option is used to enable the screensaver function (disabled by default)
• Enable screensaver images: this option is used to enable the displaying of the default or custom
screensaver (enabled by default). If the "Enable screensaver" option is enabled and "Enable screensaver
images" is disabled, once the set period of time has elapsed, the touch screen will turn off. Touch it to
reactivate it
• Remove shade on screensaver image: this option can be used to disable the green background
overlapping the screensaver image (enabled by default)
• Screensaver activation or standby time: this option can be used to set the time which must have
elapsed since the last procedure before the screensaver is activated or the touch screen enters standby
mode (from 10 to 60 seconds, default: 20 seconds)
• Enable rain protection screensaver lock: this option is used to prevent accidental activation of the touch
screen. If enabled, before performing any procedures on the Touch module, you will need to carry out the
instructions displayed on screen (swipe right)
Screensaver 01
Screensaver 02
To load a screensaver image, right-click in the box on the right and select the "Load" menu; select the desired
image using the window shown.
Note
• Compatible formats are .jpg, .jpeg, .png.
The compatible size is 480 x 800 pixel
16