Hama 00014167 Bedienungsanleitung Seite 7

• Connect the Bluetooth
3.5 mm jack socket (or AUX) to the receiving device
(e.g. on the car radio).
• To supply power to the device, the supplied USB car
charger must be plugged into the car's cigarette
lighter socket and the USB plug on the BT hands-free
facility must be connected to the USB car charger.
• The status LED (9) starts to flash blue and the device
is in search mode.
• Then activate the Bluetooth® function on your
transmitting device (e.g. smartphone) and select the
device "BT61".
• The status LED (9) lights up solid blue - the device is
paired and ready to use.
Note - Bluetooth password
®
• Some devices require a password in order to
connect to another Bluetooth
• If your device requests a password to connect, enter
the password 0000, 1234, 1111 or 8888.
6.2 Terminating the connection
• To switch off the device and terminate the connection,
unplug the USB plug (6) from the USB car charger (1).
6.3 Automatic connection
• To reconnect to the Bluetooth
the USB plug (6) back into the USB car charger (1).
• The last transmitting device is pre-set to ensure fast
connectivity.
• If this does not work, establish a new connection (see
Point 6.1 Initial connection via Bluetooth®).
6.4 Accept calls
• Pressing the multi-function key (2) once allows you
to accept a call.
• To end it, press the multi-function key again.
• To reject a call, press and hold the multi-function key
for around 2 seconds.
6.5 Bass amplification
• To activate the bass amplification function, press and
hold the button (4) until the symbol lights up blue.
4
hands-free facility using the
®
device.
®
receiver, simply plug
®
7. Charging devices
Warning - Connection of
devices
• Before connecting a device, check whether it can
be adequately supplied with the charger's current
delivery.
• Ensure that the power of the connected device does
not exceed 10.5 W.
• Note the instructions in your device's operating
manual.
Unless different instructions have been expressly given
in the operating instructions for the devices you are
charging, proceed as follows:
• Connect your device to a USB charging port using a
suitable USB cable.
• Then connect the charger to the on-board electrical
system's car socket.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you wish to
interrupt the charging process or when the device is
fully charged.
• Then disconnect the charger from the line connection.
8. Button functions
Call
Accept calls
Reject
Hang up
Music control
Increase volume
Decrease volume
Bass amplification
Next track
Previous track
Play/Pause
: Brief press
: Long press
: Brief press
: Long press
: Long press
: Brief press
: Brief press
: Brief press
: Brief press