Identification; Receiving The Product; Inspecting The Product; Scope Of Delivery - Grundfos GiM CIU Montage- Und Betriebsanleitung

STATUS LED
Permanently green
Flashing green
Permanently yellow
Permanently red

2.5 Identification

2.5.1 Nameplate
1 2 3 4
Type V-No.
Product No. Serial No.
U
FCC ID: OG3-GIM1A
N
IC: 10447A-GIM1A
P
MAX
30
XP
10
12
Made in Thailand
11 10
Example of a nameplate
Pos. Description
1 Type designation
2 Product number
3 Supply voltage
4 Version number
5 Production code (year and week)
6 Serial number
7 Enclosure class
8 FCC and IC text, only for UL variants
9 Environmental type
10 Rated power
11 Production site
12 Markings and approvals
Related information
4.1 Location

3. Receiving the product

3.1 Inspecting the product

Before installing the product, do the following:
1. Check that the product is as ordered.
2. Check that no visible parts have been damaged.
3. If parts are damaged or missing, contact your local Grundfos
sales company.

3.2 Scope of delivery

The packaging contains the following items:
• GRUNDFOS iSOLUTIONS MONITOR CIU unit (GiM CIU)
• installation and operating instructions for the product.
Description
The system is working.
GiM CIU is in learning mode.
A warning from the CR pump,
for example, high media
temperature, vibration or
cavitation. It could also
be a warning indicating, for
example, a VTU sensor fault
or missing power for the real-
time clock.
An alarm from the CR pump, for
example, dry run, high media
temperature, vibration or
cavitation.
5 6
P.c.
IP
7
8
Process control
equipment
9
ENV Type 2

4. Installation requirements

4.1 Location

Install the product in a location that meets the following
requirements:
• Place the product in a flood-safe place.
• Make sure that the ambient temperature is within the limits.
• Install the product as close as possible to the connected pumps,
sensors, and accessories.
• The product must be easily accessible.
• You must install the product in a protective shed or enclosure to
avoid direct sunlight and rain.
• Indoor installation: The product must be installed in a well-
ventilated room to ensure cooling of its components.
Related information
2.5.1 Nameplate
9. Technical data
4.2 Radio frequency radiation exposure, for Canada and
US only
This equipment complies with FCC and ISED radiation exposure
limits set forth for an uncontrolled environment. This equipment
must be installed and operated with a minimum distance of 20 cm
(0.66 feet) between the radiator and your body.
FCC ID: OG3-GIM1A
IC: 10447A-GIM1A
5