BEARWARE 303999 Bedienungsanleitung Seite 16

3.1 Setting the countdown
Just press the "START" button to select the countdown time. Press the "START"
button repeatedly. The display showing the countdown time changes in the
sequence of 15 minutes, 30 minutes, 1 hour, 2 hours, 4 hours and 6 hours. The
timer passes current to the output until the countdown time is reached.
Example: If you want to switch off the power after 2 hours, please press the
"START" button until the display shows "two hours". The timer then starts the
countdown program.
3.2 Adjusting the countdown time subsequently
Press the "START" button to switch to a different countdown program. The display
changes to the new countdown time. The timer then starts the new countdown
program.
Example: A 30-minute countdown program is already being used, but you want
to change to a one-hour program. Please press the "START" button once, the "30
minutes" display disappears and the "1 hour" display appears. The timer now
switches off the output after one hour.
16
English