Device Operation - HomeMatic IP HmIP-DLD Montage- Und Bedienungsanleitung

Operation
Automatic mode
The door is locked automatically during a previously set
period of time. The time period can be individually defined
via the week program of the door lock drive.
Further information on configuring and controlling
the door lock drive via the Homematic IP app can be
found in the Homematic IP user guide at www.
homematic-ip.com.
7.2

Device operation

Unlock
The lock bolt moves to the unlocked position. Upon com-
pletion of the procedure, an audio signal is emitted on the
lock actuator. To unlock the door manually with the de-
vice, please proceed as follows:
• Press the button "Unlock" (B) at the door lock one
time briefly.
After replacing the batteries or changing the de-
vice settings, open the door once by pressing and
holding the "Unlock" button (B) so that the lock
status is correctly reported again.
Open
The lock bolt is retracted so that the door is opened. Upon
completion of the procedure, an audio signal is emitted
52