Installation; Installation Location; Building In - Candy CRU160E Bedienungsanleitung

All manuals and user guides at all-guides.com
adhesive using white spirit. Remove all adhesive tape and packing pieces from the
interior of the appliance.

Installation

Installation Location

Before installing, carefully read the instruction in the end in order to avoid a
certain number of problems.
Warning: to avoid a hazard due to instability of the appliance, it must be fixed
according to the instructions:

Building in

Dimensions of the recess
Height (1) mm 880
Depth (2) mm 550
Width (3) mm 560
It is necessary that the cabinet has a
ventilation recess with the following
dimensions :
Depth 50mm
Width 540mm
For appropriate venting, follow
indications in the figure.
1. Push the appliance into the
housing until stop strip (A)
touches the kitchen unit.
2.Press in the joint covers between
the appliance and the kitchen
furniture (only on the side without
hinge)
3. Open the door and push the
appliance against the side of kitchen
furniture opposite to that of
appliance hinges. Fasten the
appliance with 6 screws provided in
the kit included with the appliance.
Snap hinge cover (D) into position.
5