Technical Specification - Viesta I2Z Gebrauchsanleitung

KEN001AKI
Failure display and inspection Heat settings
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem Possible causes
F3/F4 Temperature sensor of the induction
coil failure
F9/FA Temperature sensor of the IGBT
failure.
E1/E2 Abnormal supply voltage
E3 High temperature of the induction
coil temperature sensor
E5 High temperature of the IGBT tempera-
ture sensor
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.

Technical specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric
Power
Product Size
L×W×H(mm)
Building-in Dimen-
sions A×B (mm)
Note:
Dimensions are approximate.
Because we continually strive to improve our products we may change
specifications and designs without prior notice.
[English]
Viesta I4Z
4 Zones
220-240V~ 50/60Hz
6600 - 7200W
590×520×62
560×490
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power supply is
normal.
Please contact the supplier.
Please restart after the hob cools
down.
Viesta I3Z
3 Zones
220-240V~ 50/60Hz
5300 - 5800W
590×520×62
560×490
[ 23 ]
18.09.2017 • v09
Viesta I2Z
2 Zones
220-240V~ 50/60Hz
3300W - 3600W
288×520×62.5
268×500