Using The Timer Function; Setting The Timer To Turn One Cooking Zone Off; Setting The Timer On More Than One Zone - KKT KOLBE KF9005RL Benutzerhandbuch

Using the timer

7. Using the timer function

7.1 Setting the timer to turn one cooking zone off:

1. Touch the selection control of the heating zone that you want
to set the timer for and set the desired power level for your coo-
king zone by pressing the corresponding buttons
2. Press the
-key while the power indicator is still flashing.
Then you can set a desired time from 1 to 99 minutes by pressing
the keys and .
Note:
Each time you touch on the
1 minute; hold
Each time you touch on the
1 minute; hold
3. When the time is set, wait briefly until the display stops flashing.
The countdown is started and the display will show the remaining time.
4. When the time has elapsed, this cooking zone will switch off.
Other cooking zones will keep operating if they were
!
turned on previously.

7.2 Setting the timer on more than one zone:

1. If you set the timer at several cooking zones, the lowest remaining
time is displayed. (eg Zone 4 - rest time 15 minutes, Zone 5 rest time 5
minutes, the timer display shows „5".)
The flashing dot next to the corresponding power indicator indicates the
cooking zone to which the timer indicator refers.
rest time 15 minutes
36
key, the timer value increases by
key to increase the value in steps of 10 minutes.
key, the timer value decreases by
key to decrease the value in steps of 10 minutes.
rest time 5 minutes, red dot flashes
and .