KKT KOLBE KF5900IND Benutzerhandbuch Seite 34

Using your induction hob
3. Touch the heating zone selection control.
An indicator next to the key will flash.
4. Select a power level by using the slider.
• If you don't select a power level within one minute,
the configuration will be canceled.
Then start again at step 1.
• You can adjust the power level during operation.
To do this, first touch the corresponding cooking zone
selection control and then set the desired power level.
• The power level can be selected in an interval
from 0 to 15.
If no further action is taken within one minute and all zones are
set to 0, the hob goes into stand-by mode.
If the display flashes
heat setting - This means that:
• You have not placed a pan on the correct cooking
zone or,
• the pan you're using is not suitable for induction
cooking or,
• the pan is too small or not properly centred on the
cooking zone.
No heating takes place unless there is a suitab-
le pan on the cooking zone.
The display will then automatically turn off
after 1 minute.
34
alternately with the
0 8
power up
B