Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FT0073 Wireless Indoor/Outdoor 8-Channel
1. Introduction
Thank you for your purchase of the FT0073 Wireless Indoor/Outdoor 8-
Channel Thermo-Hygrometer with Three Remote Display. The following
user guide provides step by step instructions for installation, operation
and troubleshooting.
2.Getting Started
Note: The power up sequence must be performed in the order
shown in this section (insert batteries in the remote transmitter(s) first,
Display Console second).
The unit consists of a display console (receiver), and three thermo-
hygrometer (remote transmitter).
2.1 Parts List
QTY
Display Console
1
Frame Dimensions (LxHxW): 11.5x12.5x2.25cm
LCD Dimensions (LxW): 9.5x8.0cm
Thermo-hygrometer transmitter
3
Dimensions (LxHxW): 11x4.5x2.0cm
2.2 Recommend Tools
Hammer and nail for hanging remote thermo-hygrometer transmitter.
2.3 Thermo-Hygrometer Sensor Set Up
Note: Do not use rechargeable batteries. We recommend fresh
alkaline batteries for outdoor temperature ranges between -20 °C and
60 °C and fresh lithium batteries for outdoor temperature ranges
between -40 °C and 60 °C.
Sainlogic
Thermo-Hygrometer User Manual
Item
-18-
Werbung
