Herunterladen Inhalt Inhalt Diese Seite drucken

Antari B-200 Bedienungsanleitung Seite 2

Vorschau ausblenden Andere Handbücher für B-200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Congratulations on the purchase of your new
Introduction
Thank you for choosing the ANTARI B-200 Bubble Machine. You now own a rugged and powerful state-
of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following
the suggestions found in this user manual, you can look forward to the reliable and satisfactory
performance of your ANTARI Bubble Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your
bubble machine.
Pay attention to all warning lables and instructions printed on the exterior of your
Danger of Electric Shock
Keep this device dry.
Keep the bubble machine upright.
For inside use only. Not designed for outside use.
For the 110 V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine
that the unit is installed at the rated voltage.
Do not overfill your bubble machine. Overfilling will cause the unit to leak.
Do not tilt or angle the bubble machine. This may result in bubble liquid spilling out of the liquid tray.
Turn off or unplug the machine when not in use.
This machine is not water-proof or splash-proof. If moisture, water, or bubble fluid gets inside the
housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before
using it again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
This appliance must be earthed.
For adult use only. The bubble machine must be installed out of the reach of children. Never leave the
unit running unattended.
Never aim the output at open flames.
Extended use may make surfaces where the bubbles land slippery.
Position output of bubbles away from persons.
Switch off from main power when refilling the liquid or cleaning the system.
Regular cleaning of the bubble wheel is required.
Install the bubble machine in a well-ventilated area. Never cover the unit's vents. In order to guarantee
adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
Do not transport with liquid. If the machine gets wet, do not use it before it is completely dry.
Antari bubble liquid may leave permanent marks on clothing.
TeUser Manual
Antari B-200 Bubble Machine
ANTARI Bubble Machine
Antari Bubble Machine. This appliance must be earthed.
CAUTION!
1

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Antari B-200

Diese Anleitung auch für:

B-200t

Inhaltsverzeichnis