Trouble Shooting - Grizzly ELS 3027 E Combi Originalbetriebsanleitung

GB

Trouble shooting

Problem
Appliance won't
start
Intermittent
operation
Weak or no
suction power/
throughput
Impeller does
not move
78
Possible cause
No mains power supply
Worn out carbon brushes
Motor faulty
On/Off switch ( 4) defective
The suction tubes (
ection bag ( 14), and/or blower
tubes ( 9) and protective cover
( 7) are not correctly mounted.
Internal loose contact
Power cable damaged
On/Off switch ( 4) defective
Collection bag (
Collection bag (
Impeller, blower or suction pipe
( 9/17) is clogged or blocked
Foreign body blocking the im-
peller
Corrective action
Check the socket, cable, line, plug
and fuse and have them repaired by
a qualified electrician if necessary.
Send in to Service Centre for repair
17) and coll-
See the section on „Initial start-up"
Send in to Service Centre for repair
Empty collection bag
14) is full
Clean collection bag
14) is dirty
see „Removal of clogging
and blockage"
Remove the blockage (see „Re-
moval of clogging and blockage")