Box Contents; Identification Of Parts; Assembly - Texas A/S Handy Sweep 600 Bedienungsanleitung

Only use the machine in areas where it can be operated safely! Do not use
sweeper in areas with steep slopes, and always keep both hands on the handle
bars while working.

Box Contents

Figure 1:
a. Machine with upper handle bar mounted
b. Swing handle
c. Mounting hardware for handle bar
d. Engine Manual and User's Manual
e. Tool kit (supplied with Engine Manual)

Identification of parts

Figure 2
a. Brush
b. Support wheel for brush / adjustment of sweeping height
c. Wheels
d. Lower part of handle bar
e. Mounting hardware for upper part of handle bar Adjustment of upper handle bar
f. Upper handle bar
g. Clutch handle – Activating brush
h. Clutch handle – Forward
i. Clutch handle – Reverse
j. Throttle
k. Swing handle
l. Motor (may vary from picture)
m. Belt guard

Assembly

The sweeper is almost ready assembled from the factory. Only a few items remain to be
assembled:
1. Mount upper part of handle bar to lower part with the enclosed bolt kit.
See Figure 3 and 4
Explanation, Figure 4:
a. Lower part of handle bar
b. Upper handle bar
2. Mount swing handle with enclosed bolt and nut.
Figure 2, k.
12