Model Without Mains Plug: Connection By Electrical Professional - Aerial WT 230 Bedienungsanleitung

Model without mains plug: Connection by electrical
professional
This chapter is intended only for trained electrical professionals (e.g. electricians).
Danger to life due to electric shock
 Prior to commissioning the technical data of the indoor air
DANGER
 Use exclusively the original power cable! In case of loss or
 The device must only be connected by a trained electrical
 Work on electrical parts of the indoor air laundry dryer may
The following items must be checked prior to electrical connection of the indoor air
laundry dryer:
Is the mains voltage in conformity with the voltage of the device?

Is the supply system sufficiently fused?

Has an RCCB been installed?

1. Make sure that the cables cannot be live, e.g. by switching off the relevant fuse.
2. Use a suitable voltage detector to ensure that none of the cables are live.
3. Connect the electric cable of the indoor air laundry dryer to the electric circuit as
directed.
1. Connect earth wire;
2. Connect neutral wire;
3. Connect phase.
N = blue = neutral wire
PE = green/yellow = earth
wire
L1 = brown = phase
4. Restore the power supply and check that it is working.
laundry dryer must be compared with the conditions
prevailing in the room of installation!
damage original power cables are available from your
supplier.
professional (e.g. electrician).
only be carried out by the manufacturer or by authorised
qualified electricians.
Fig. 4: Connection
40