Model With Mains Plug: Connection - Aerial WT 230 Bedienungsanleitung

2. Lift the indoor air laundry dryer from the top into the wall rail in such a way that the
mounting bar on the rear side (page 34,34 Fig 1, item 4) engages in the wall rail.
Damage to the device
The indoor air laundry dryer must be aligned along all axes.
CAUTION
 Check the position of the indoor air laundry dryer using a
3. Fix the indoor air laundry dryer using the two lateral fixing screws on the wall rail.

Model with mains plug: Connection

Danger to life due to electric shock
 Prior to commissioning the technical data of the indoor air
DANGER
 Use exclusively the original power cable! In case of loss or
 Work on electrical parts of the indoor air laundry dryer may
The following items must be checked prior to electrical connection of the indoor air
laundry dryer:
Is the mains voltage in conformity with the voltage of the device?

Are socket and supply system sufficiently fused?

Has an RCCB been installed?

Is the appliance coupler suitable for the building socket outlet?

Is the socket outlet used grounded properly?

1. Connect the power cable of the indoor air laundry dryer to a suitable power outlet.
spirit level.
laundry dryer must be compared with the conditions
prevailing in the room of installation!
damage original power cables are available from your
supplier.
only be carried out by the manufacturer or by authorised
qualified electricians.
39