Werbung
en - English
Please take care to read the
operating and installation
instructions for the extractor hood
before installing the drop-down
frame and the cooker hood. Only
connect it to the electricity supply
when the installation of all
components is complete.
Notes for diagram on page 2
1) Unit height in extraction mode, if the
air is being conducted upwards out
of the unit.
2) Unit height in recirculation mode with
DUU 151 conversion kit.
3) Trim the wall unit carcase so that it is
50 mm shorter than the wall unit
door.
All other dimensions are as quoted on
the building-in diagrams for DA 3360,
3460, 3480 and 3490.
A unit base is not required.
Installation of DA 3490 in a 600 mm
wide unit with the drop-down frame is
not possible.
The safety distance between the
extractor hood and the hob must be
maintained when the extractor hood
is lowered.
The extractor hood requires flexible
ducting to allow it to drop down. Please
use the highly flexible ducting hose
supplied.
4
Werbung
