Herunterladen Diese Seite drucken

Lightmaxx Platinum Line LED PAR 16 3200K Polish Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

User Manual:
Warning:
For your own safety, please read this user manual carefully before your initial start-up!
Safety instructions:
Every person involved with the installation, operation & maintenance of the equipment should:
-
Be competent
-
Follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused during transportation.
Should there be any, consult your dealer and do not use the equipment!
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for
the user to follow the safety instructions and warning notes written in this manual.
Important:
Please note that damages caused by user modifications to this equipment are not subject to
warranty.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the equipment.
• Never let the power-cable come into contact with other cables. Handle the
power-cable and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not connect this equipment to a dimmer-pack.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system's life.
• Only use the equipment indoors.
• Do not expose to flammable sources, liquids or gases.
• Always disconnect the power from the mains when equipment is not in use before
cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling
the power-cable.
• Make sure that the available voltage is between 220v/240v.
• Make sure that the power-cable is never crimped or damaged. Check the equipment
and the power-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power
supply immediately.
Have a qualified engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic temperature fluctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation might
damage the equipment. Leave the equipment switched off until it has reached room
temperature.
• If your product fails to function correctly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Prolight
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be carried out by a qualified
technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.

Werbung

loading

Diese Anleitung auch für:

Lig0007903-000