Audio Input; Phantom Power - AUDIOropa PRO LOOP Class-D Serie Bedienungsanleitung

5.6 Audio Input

5.6.1 Sensitivity
The levels of INPUT 1 and 2 can be set according to the audio source used.
If the connected audio source is a microphone, switch the according grey button to the
»Mic« position, as indicated on the rear panel of the device.
If the connected audio source connected to one of the inputs is of line-type, switch the
according grey button to the »Line« position.

5.6.2 Phantom power

The DIP switch on the rear panel of the amplifier (see depiction above) can activate phan-
tom power for microphones which require it.
If the audio source connected to one of the inputs is a phantom-powered microphone, set
the the according DIP switch to the upper position.
If the audio source connected to the inputs is a microphone which does not require phan-
tom power, or if it is not a microphone, set the DIP switch to the down position.
English 35