Mains Supply - Clatronic eki 3092 Bedienungsanleitung

CL_BDA_IKP_3092_NEU_ka3.qxd
GB
Connected load/wattage
The hob can take up an overall load of 1,800W. Because of this high connected load it is
recommended to use a separate connection protected over a 16A safety switch.
Pay attention to overloads! Do not use extension cables or multiple sockets as the power
consumption of this device is too high for these.
Connection
• Before inserting the mains plug into the socket check whether the voltage which you
intend to use corresponds to that of the machine. Please see the label on the machine
for details.
• Only connect the machine to a correctly installed safety socket, 230V/50Hz.
Explanation of the symbols
low temperature
for about 70°C
1
low performance
Depending on the quantity of the food to be cooked, the kind of the pot, and the coo-
king time the temperature can deviate from the indicated values.
Initial operation
1. Standby mode: After you have connected the device's plug to the mains supply, the hub
is in standby mode. The operating mode indication (1) flashes.
2. Put a suitable pot on the cooking zone.
3. Push the ON/OFF button (2) to start the cooking process.
The operating mode indication (1) lights up and continuously remains lit-up.
4. Use the FUNCTION button (3) to select the desired cooking function.
Cooking function
Push the FUNCTION button (3) repeatedly to select one of the cooking functions available.
The indicator lamp for the respective cooking function will light up.
48
15.03.2007

Mains supply

Operating instructions
for about 100°C for about 140°C for about 200°C
2
10:17 Uhr Seite 48
3 4
high temperature
for about 240°C
5
high performance