Time Display; Starting A Programme - Beko WTE10741BSCDOS1 Bedienungsanleitung

To disable Bluetooth:
Press and hold the Remote Control function button for 3 seconds. You will see the countdown "3-2-1"
and the Bluetooth symbol will turn off.
C
You must complete the first setup of the HomeWhiz app for Bluetooth to be enabled. After the setup, if you press the Remote
Control function button while the button is in the Programme Download/Remote Control position, the Bluetooth connection
will be enabled automatically.
4.3.9 End Time

Time display

While the programme is running, the time remaining to the end of the programme will be displayed in hours
and minutes, e.g. "01:30".
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes in the mains voltage.
With the End Time function, start of the programme can be delayed up to 24 hours. After pressing End Time
button, the programme's estimated end time will be displayed. If the End Time is set, End Time indicator will
turn on.
To ensure that the End Time function is enabled and the program ends at the end of the defined duration, you
should press Start / Pause after setting the duration.
If you want to cancel the End Time function, turn the knob to on/off position.
C
If you enable the End Time function, do not add liquid detergent into the powder detergent compartment 2. Stains might
remain on the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Press the End Time button to set the desired end time. End Time indicator will turn on.
4 Press the Start/Pause button. Countdown starts. ":" sign in the middle of the end time on the display will
start flashing.
C
The loading door will be locked while End Time is enabled.
During the End Time countdown, you can add laundry into the machine. (See 4.3.12). At the end of the countdown, End Time
indicator will turn off, washing cycle will start and the duration of the selected will be displayed.
When End Time is selected, the time shown on the display is the end time.

4.3.10 Starting a programme

1 Press Start/Pause button to start the programme.
2 The light of the Start / Pause button, which is off, will now turn on to indicate that the programme has started.
3 Loading door will be locked. After the loading door has been locked, door lock symbol will appear on the display.
Washing Machine / User's Manual
23 / EN