End Of Programme - Beko WTE10741BSCDOS1 Bedienungsanleitung

4.3.14 End of programme

Once the programme is completed, the End symbol will be displayed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press any button.
4.3.15 HomeWhiz and Remote Control Functions.
HomeWhiz allows you to use your smart device to control your washing machine and get information about it.
Thanks to the HomeWhiz application, you can use your smart device to carry out some procedures you can
also do on the machine. Plus, you can use some features only with the HomeWhiz function.
To use the Bluetooth function of your machine, you should download the HomeWhiz app from the application
store of your device.
Make sure that your smart device is connected to internet to download the app.
If you are using the app for the first time, please follow the on-screen instructions to complete the user
registration process. Once the registration is complete, you can use all products with the HomeWhiz feature in
your house on this account.
On the HomeWhiz app, you can tap "Add/Remove Appliance" to see the products paired with your account.
You can pair these products on this page.
After installing the application, the HomeWhiz function will allow the machine to send you push notifications
via your smart device.
C
To be able to use the HomeWhiz function, make sure that the app is installed on your smart device and that your washing
machine is paired with your smart device via Bluetooth. If the washing machine is not paired with your smart device, it will
function as an appliance without the HomeWhiz feature.
Your product will run once it is paired with your smart device via Bluetooth. Checks performed on the app will be enabled
through this pairing. For this reason, the Bluetooth signal between the product and the smart device must be strong enough.
Please visit www.homewhiz.com to see the Android and iOS versions supported by the HomeWhiz application.
A
WARNING:
manual apply to the remote operation through HomeWhiz function as well.
4.3.15.1 HomeWhiz Setup
Your product and the HomeWhiz app must be connected for the app to run. To establish this connection,
please follow the steps below for setup both on your product and on the HomeWhiz App.
• If you are adding an appliance for the first time, tap "Add/Remove Appliance" on the HomeWhiz App.
Then tap "Tap here to setup new appliance". Follow the steps below as well as the instructions on the
HomeWhiz App to complete the setup.
• To start the setup process, make sure that your machine is switched off. Press and hold the Temperature
button and the Remote Control Function button simultaneously for 3 seconds to switch your machine to
HomeWhiz setup mode.
While the device is in HomeWhiz setup mode, you will see an animation on the display, and the Bluetooth
•
icon will flash until the machine is paired with your smart device. In this mode, only the programme button is
enabled. Other buttons are disabled.
• On the screen of the app, select the desired washing machine and tap Next.
26 / EN
All the safety measures described in
"GENERAL SAFETY INSTRUCTIONS"
section of your user
Washing Machine / User's Manual