Spin Speed Selection; Auxiliary Function Selection - Beko WTE10741BSCDOS1 Bedienungsanleitung

You can also change the temperature after the washing cycle has started. This can be done if the washing
steps allow it. If they don't permit it, you can't do it.
C
If you go to the washing option and press the Temperature Adjustment button again, the maximum temperature
recommended for the selected programme will be displayed. To decrease the temperature, press the Temperature
Adjustment button again.

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed is not the highest value that can be selected for the relevant programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold"
If you are not going to unload your clothes immediately after the programme ends, you can use the Rinse
Hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start/Pause/Cancel. Programme will resume. The machine will drain the water and spin the clothes.
If you want to drain the water at the end of the programme without spinning, you can use the No Spin function.
C
No change can be made in programmes where spin speed is not allowed.
If the washing steps permit, you can change the spin speed after the washing cycle has started. If they don't
permit it, you can't do it.
Rinse hold
If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold
function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there
is no water in the machine. Press Start/Pause button after this process if you want to drain the water without
spinning your laundry. Programme will resume where it left off, drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause button.
Programme will resume. Water will be drained, laundry will be spun and the programme will end.

4.3.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. When a programme is selected, symbols
of the auxiliary functions selected with it will turn on.
C
If you press the key for an auxiliary function that cannot be selected with the current programme, you will hear a warning
from the washing machine.
20 / EN
-
-
-
-
-
-
- - -
- - -
and "No Spin" options appear on the display.
Washing Machine / User's Manual