Chapter -4: Food Storage Guidance; Chapter -5: Door Reversal; Chapter -6: Troubleshooting - Sharp SJ-LC41CHDI2-EU Bedienungsanleitung

CHAPTER -3: USING YOUR FRIDGE
Cleaning
• Make sure to unplug the fridge before starting to clean it.
• Do not wash your fridge by pouring water over it.
• You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.
• Remove the parts individually and clean with soapy water. Do not wash in a dishwasher.
• Never use flammable, explosive or corrosive material like thinner, gas, acid for cleaning.
• You should clean the condenser with a broom at least once a year in order to provide energy saving and
increase the productivity.
Make sure that your fridge is unplugged while cleaning.
Replacing LED Lighting
If your fridge has LED lighting contact the Sharp help desk as this should be changed by authorized personnel only.

CHAPTER -4: FOOD STORAGE GUIDANCE

• To reduce frost build up never place liquids with unsealed containers in the fridge compartment.
• Allow warn or hot food to cool down before storing. This helps reduce power consumption.
• To avoid frost buildup ensure that nothing is stored touching the back wall.
• The coldest area of the refrigerator is at the bottom. We recommend to use this area to store food that will perish
easily, such as fish, ready meals, baked goods or dairy products. The warmest area is the top shelf of the door.
We recommend you store butter or cheese here.

CHAPTER -5: DOOR REVERSAL

Repositioning the door
• It depends on which fridge you have as to whether it is possible the reverse the doors.
• It is not possible where handles are attached at the front of the appliance.
• If your model does not have handles it is possible to reverse the doors, but this needs to be completed by
authorised personnel. Please call Sharp service.

CHAPTER -6: TROUBLESHOOTING

Check Warnings;
Your fridge warns you if the temperatures for cooler is in improper levels or when a problem occurs in the appliance.
Warning codes are displayed in the cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E08
MEANING
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Low Voltage Warning
WHY
Power supply to the device
has dropped to below
170W.
EN -11-
WHAT TO DO
Contact the Sharp help desk as
soon as possible.
Contact the Sharp help desk as
soon as possible.
Contact the Sharp help desk as
soon as possible.
Contact the Sharp help desk as
soon as possible.
Contact the Sharp help desk as
soon as possible.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues, contact
the Sharp help desk as soon as
possible.