CapsoVision CapsoCam Plus Bedienungsanleitung Seite 13

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
a
land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in which
the CapsoCam Plus is used exceeds the applicable RF compliance level above, the CapsoCam Plus should
be observed to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as
re-orienting or relocating the CapsoCam Plus.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
b
(Table 3 continued)
Document Number: IFU-2320 Rev: J Revision Date: 08/2020
Interference may occur in the vicinity
of equipment marked with the
following symbol:
13