Inhaltsverzeichnis
Werbung
SPECIFICATIONS
General Specifications
instruments will also respond to
unwanted signals that may be present
Display: 3 3/4 digit LCD, 4000 count
within the measurement circuit. Users
Polarity Indication: Automatic, positive
should exercise care and take appropriate
implied, negative indicated
precautions to avoid misleading results
Overrange Indication: "OL"
when making measurements in the
presence of electronic interference.
Display Update Rate: 2/sec. nominal
Low Battery Indication:
. Change
Electrical Specifications
batteries when low battery is
Accuracies at 23°C ± 5°C, <75% RH.
indicated.
Operating Temperature: 0°C to 50°C,
DC Volts
0 to 70% Relative Humidity
Ranges: 400mV, 4, 40, 400, 600V
Storage Temperature: -20°C to 60°C,
Accuracy, all Ranges: ±(0.8% rdg
0 to 80% RH with battery removed
+1dgt)
from meter
Resolution, 400mV Range: 0.1mV
Power: Two 1.5V AAA batteries
Input Impedance: 10MΩ
Automatic Shutdown: 30 minutes after
OL Protection: 600VAC
last function/range change.
RMS/1000VDC (60 seconds)
Battery Life (Typical): 700 hours
AC Volts (40-400Hz). Accuracies
alkaline, 500 hours carbon-zinc
apply to sine wave inputs only
Dimensions (H x W x D): 5.45 x 3.1 x
Ranges: 4, 40, 400, 600V
1.55 inches, (14 x 8 x 4 cm)
Accuracy, all ranges: ±(1.5%rdg +
Weight (including batteries): 8.2
4dgt)
ounces (215 grams)
Input Impedance: 10MΩ
Accessories: Test leads (attached),
OL Protection, all ranges: 600VAC
holster, battery, and operator's
RMS/1000VDC (60 seconds).
manual.
DC Current
Safety: Meets EN61010-1: Cat II-600V
Ranges: 40, 400mA
EMC: Meets EN50081-1, EN50082-2
Accuracy: ±(2.0% Rdg + 1 dgt)
EMC:
This product complies
with requirements of the
OL Protection: 500mA/250V fast blow
following European Community
glass fuse (5 x 20 mm)
Directives: 89/336/EEC (Electromagnetic
AC Current
Compatibility) and 73/23/EEC (Low
Ranges: 400mA
Voltage) as amended by 93/68/EEC (CE
Accuracy: ±(2.0% Rdg + 1 dgt)
Marking).
OL Protection: 500mA/250V fast blow
However, electrical noise or intense
glass fuse (5 x 20 mm)
electromagnetic fields in the vicinity of
the equipment may disturb the
Resistance
measurement circuit. Measuring
Rgs: 400Ω, 4, 40, 400kΩ, 4, 40MΩ
- 8 -
All manuals and user guides at all-guides.com
Werbung
Inhaltsverzeichnis
