Bosch MSM6B KL Serie Gebrauchsanleitung Seite 5

For your safety
This accessory is designed for the hand blender MSM6B.. .
Follow the operating instructions for the hand blender.
, Safety instructions for this appliance
Risk of injury from sharp blades/rotating drive!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by the plastic handle only.
Never clean the blades with bare hands. Use a brush.
Important!
Do not attach or remove accessories until the appliance
is at a standstill.
The universal cutter is suitable only for the use described in these
instructions. Never use the hand blender/blender foot in the universal
cutter. The universal cutter is not microwave-safe.
Do not attach or remove the attachment for the universal cutter until
the appliance has come to a standstill. Never immerse the attachment
of the universal cutter in liquids and do not clean under flowing water
or in the dishwasher.
Before use, read these instructions carefully
in order to become familiar with important
safety and operating instructions for this
appliance.
Please keep the operating instructions
in a safe place.
If passing on the appliance to a third party,
always include the operating instructions.
On account of the different models,
it is possible that not all accessories are
included in your set. These are also available
separately from customer service.
Universal cutter
Please fold out the illustrated pages.
Fig. 
1 Universal cutter
2 Blade
3 Attachment
4 Lid
Robert Bosch Hausgeräte GmbH
Operation
For cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds
Always observe the maximum quantities
in the table (Fig. ).
Warning!
Before cutting meat, remove gristle, bones
and sinews.
The universal cutter is not suitable for cutting
very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig. 
Place the universal cutter on a smooth,

clean work surface and press.
Insert the blade.

Add food.

Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
en
5
5