Reset To Default Settings - behnke 10-IP Serie Anleitung

All manuals and user guides at all-guides.com

reset to default settings

5.
Complete the following steps to reset the
remote station to its default setting:
▸
Disconnect the power supply to your SIP
remote station
▸ Press buttons T1 and T2 simultaneously and
keep them pressed
▸
Reconnect the power supply to your SIP
remote station
▸
Keep buttons T1 and T2 pressed until two
LEDs (green, blue) start flashing every
second
▸
Release buttons T1 and T2
▸
The remote station will be reset to default
settings; this process takes approx. 90
seconds
Successful completion of the reset will
be confirmed by the speakers emitting a
confirmation tone.
www.behnke-online.com
Instructions for Behnke SIP 2.0
Reset to default settings
The web interface offers a second option to
reset the device to its default settings, to do
so, please take the following steps:
Admin
Reset
GB
Restore
47