Connections - behnke 10-IP Serie Anleitung

Instructions for Behnke SIP 2.0
GB
Hardware

2.3. Connections

Network connection - INPUT
40
All manuals and user guides at all-guides.com
Ethernet connection according to
EIA/TIA 568 A
Usually, an RJ-45 connector (
used to establish a network connection. You
may also connect the individual cores to the
connection interface using a terminal block
: The network is connected to the terminals
marked 1 (white-green); 2 (green); 3 (white-
orange); and 6 (orange) according to EIA/TIA
specification 568 A.
The number indicated refers to the pin
position of the RJ45 plug / the RJ45 socket.
Please note:
The network connection must either be made
via an RJ45 connectors or a screw terminal!
The second RJ45 socket (PORT 2)
intended for the connection of other terminal
devices (e.g. an IP camera).
Ethernet connection according to
EIA/TIA 568 A
1: white-green
2: green
3: white-orange
6: orange
www.behnke-online.com
"INPUT") is
is