All manuals and user guides at all-guides.com
Power supply
Power supply via PoE according to
IEEE802.3af. If the remote station is connec-
ted by means of a screw terminal, the device
supplying power must support phantom
power (supply via wires 1, 2 and 3, 6, e.g. the
Behnke PoE injector).
www.behnke-online.com
Instructions for Behnke SIP 2.0
Network connection PORT2
The 2nd Ethernet port is connected via an
additional RJ45 socket labelled "Port2"
As the SIP remote station features a PoE-
feeding switch, it is possible to connect a PoE-
compatible terminal device with a maximum
power drain of 7 W to this port.
Please note: There are no screw terminals for
the 2nd Ethernet port.
GB
Hardware
.
41